Xerox Phaser 5335 Mode D'Emploi

152

7 Maintenance

Follow these guidelines when sending an e-mail to the printer.
• Use the e-mail application on your computer and enter the printer's e-mail address in the 

"To:" field. 

• The subject can be whatever you like. 
• Enter the following commands observing the rules described below.

Note
• The method of sending e-mails varies depending on the application being used. Consult the 

documentation for your e-mail application. 

„ Supported Commands

„ Command Entry Rules

Follow these guidelines when entering commands on e-mails.
• Commands are not case sensitive.
• If [Password for Read-Only Data] is set, start your e-mail with "#Password".
• Prefix each command with "#". Command that does not start with "#" will be ignored.
• Place only one command per line and separate each command or parameter with a space 

or a tab.

• When the same command is entered more than one time in one e-mail, only the first one 

will be valid and the rest will be ignored.

„ Example

1. If you want to obtain the printer's status when [Password for Read-Only Data] is not 

set, enter:

2. If you want to obtain the printer's status and network setting information when 

[Password for Read-Only Data] is set to "ronly", enter:

#Password

Password

When [Password for Read-Only Data] is set, make sure 

to start your e-mail with this command. When the 

password is not set, you do not need to enter this 

command.

#NetworkInfo

-

Specify this command when you want to obtain the 

network setting information.

#Status

-

Specify this command when you want to obtain the 

printer's status.

#Status

#Password

ronly

#Status

#NetworkInfo