Xerox Phaser 5335 Mode D'Emploi

4

1 Printer Environment Settings

Connect the printer to your computer using an interface cable appropriate for your 

connection method.
An interface cable is not included with the printer. You must purchase it separately.

1. Switch the printer off.

2. Plug the parallel cable into the interface connector on the printer.

Secure the parallel cable into the connector using the clips on both sides of the 

connector.

3. Plug the other end of the parallel cable into your computer.

4. Switch the printer on.

When using USB connection, install a print driver on your computer before connecting the 

cable. For installation instructions, refer to "1.6 Installing a Print Driver" (P. 16) or the 

Documentation CD-ROM.

1. Switch the printer off.

2. Plug the USB cable into the interface connector on the printer.

3. Plug the other end of the USB cable into your computer.

4. Switch the printer on.