Xerox Phaser 5335 Mode D'Emploi

2.2 Switching On/Off the Power

25

1. Press the power switch to the <|> position.

2. When the power is turned on, the display 

reads [Please wait...]. Wait until the 

message changes to [Ready to print].

Note
• When the display reads [Please wait...], the printer is 

warming up and is not ready to print yet.

• If an error message is displayed, refer to "Error 

Messages (in Alphabetical Order)" (P. 129) to remedy 

the error.

Important
• Do not switch the power off while the hard disk (optional) is being accessed.

• Do not switch the power off when the display reads [Please wait...].

• Do not switch the power off during printing. Doing so can cause paper jams. 

• Switching the power off erases the print data remaining in the printer and the information stored in the 

printer's memory.

1. Make sure that the printer is not in 

operation by checking the display or 

indicator lamps.

2. Press the power switch to the <O> position.