Xerox Phaser 5335 Mode D'Emploi

64

4 Paper

When loading paper longer than 14" (279.4 mm) such as B4, A3, and 11 x 17" in Tray 2, 3, 

4 or 5, you must extend the tray. When the tray is extended, the extended portion projects 

out from the back of the printer.
A5, B5, A4, and 8.5 x 11" size paper cannot be loaded in landscape orientation when a tray 

is extended. When loading A5, B5, A4, or 8.5 x 11" size paper in landscape orientation, 

unextend the tray by pushing the extended portion back into the tray.
For instructions on how to extend or unextend a tray, refer to Steps 2 and 3 in the following 

procedure. 
If you do not need to extend or shorten a tray, skip Steps 2 and 3.

The following explains how to load paper in Tray 2. The procedure is the same also for the 

trays 3, 4, and 5.

Important
• Do not remove or add paper to the paper trays during printing. Doing so can cause paper jams. 

• Make sure to load paper when the power is on.

1. Pull out the tray until it stops. Hold the tray 

with both hands, lift it up slightly, and then 

pull it out completely.

2. If you do not need to extend the tray, 

proceed to Step 4.

If you need to extend the tray, release the 

extension lock by sliding the left and right 

tabs in the tray outward.

Extended

Normal