Xerox Phaser 5500 Mode D'Emploi
Front Panel Messages
Phaser® 5500 Laser Printer
4-61
Drum Cartridge Is Near End Of Life
The Drum Cartridge is near the end of its life.
Order replacement P/N 113R00670.
Duplex Unit Failure
An error was detected in the Duplex Unit. Printing
continues single-sided.
continues single-sided.
1.
Turn power off.
2.
Verify Duplex wire harness is properly connected by
unplugging and reconnecting.
unplugging and reconnecting.
3.
Turn power on.
4.
If error continues, call Service
Duplicate IP address detected
Another device on the network is using the IP address
assigned to this printer. Change the IP address of the
printer or the other device.
assigned to this printer. Change the IP address of the
printer or the other device.
Exit Unit Failure
An error was detected in the Exit Unit. Printing continues
single-sided.
single-sided.
1.
Turn power off.
2.
Remove and reinstall the Exit Unit.
3.
Turn power on.
4.
If error continues, call Service.
Finisher Failure
An error was detected in the Finisher.
1.
Turn power off. Printing continues using the Standard
Output Tray.
Output Tray.
2.
Verify Finisher wire harnesses are properly connected
by unplugging and reconnecting.
by unplugging and reconnecting.
3.
Turn power on.
4.
If error continues, call Service.
Finisher Logic Board Failure
An error was detected from the Finisher Logic Board
NVRAM memory. Printing continues using the Standard
Output Tray.
NVRAM memory. Printing continues using the Standard
Output Tray.
1.
Turn power off, then on.
2.
If error continues, call Service.
Humidity Sensor Failure
An error was detected in the humidity sensor. Print quality
may be degraded.
may be degraded.
1.
Turn power off, then on.
2.
If error continues, call Service.
Insert Tray [2 | 3 | 4 | 5 | 6]
Reinsert the indicated tray to continue printing.
Error or Warning Messages (Continued)
Message
Description