Bretford 58" Jumper Cable DPJ58 Manuel D’Utilisation

FLUID POWER SYSTEM
POWER BELOW THE WORK SURFACE

• 

System daisy chains the power on up to four tables, 16-outlets, off of a standard 15-amp electrical outlet.

• 

Fluid provides the benefits of a hard wired electrical system at less than half the cost while maintaining the flexibility of             

individual power strips without the hassle of finding an outlet for each one.

• 

Simple installation mounts power strips to pre-drilled holes using thumb screws and can be performed by anybody. No tools 

or electricians are required. Fluid can be retrofitted onto older Bretford Basics and Presentation Environments computer and   

training tables or anywhere the CFPS or ECF6 electrical units are used.

• 

A 12-amp electrical sensor monitors electrical usage and will shut the system down when an overload is detected. The power 

in-feed LED indicator shows green when the power configuration is within safe parameters and changes to a solid red LED if the 

system has too many power strips. The LED flashes red when more than one power in-feed is connected to the same row.

• 

Power strips clip together with jumper cables that span between the tables and can be quickly and easily released to allow the 

tables to be moved, maintaining flexibility for reconfiguration and allowing easier cleaning of the facility.

• 

Power strip and jumper cables are keyed alike, allowing individual tables to be connected in any order.

• 

The Fluid Power System has been tested by Underwriter Laboratories and UL Recognized for safety as an electrical component 

for use on tables. Not approved by the Electrical Safety Authority for use in Ontario Canada.

• 

Made in the USA.

• 

The Fluid Power System can mount to the cord management bin on any Basics Connections (except Connections Flat Screen), 

Quattro or SmartDeck computer tables and KR training tables; Legacy Library Technology series tables and carrels; Collections 

Here and Presentation Environments training tables; and Tru and Presentation Environments conference room tables.

The system for below the work surface 
features a 4-outlet electrical unit that 
mounts below the work surface and can 
daisy chain up to 4 tables (16-outlets) 
off a standard electrical outlet.

Made In The USA

Fluid power shown on the 
Here Series training table