Xerox Phaser 790 Mode D'Emploi
Clearing Area 1 jams
23. Problem Solving
Xerox Phaser 790
23-7
Clearing Area 1 jams
Perform this procedure when the message Clear Jam in Area 1 is displayed
on the Control Panel.
on the Control Panel.
1.
Remove any jammed or torn paper or other stock from Area 1, Bypass
Tray. Ensure that there are no pieces of torn stock remaining in the tray.
Tray. Ensure that there are no pieces of torn stock remaining in the tray.
301088a
2.
Remove any stock loaded in the Bypass Tray.
301089a
3.
In order to access a jam in the transport, pull the Bypass Tray all the
way out of the Pinter.
way out of the Pinter.
301090a