Xerox Phaser 140 Mode D'Emploi

The following table provides a list of messages that can appear on the front 
panel.  The messages are also reported to the Macintosh driver in a slightly 
different form.    

ready

idle

There are no print jobs pending or printing and no errors.

not ready

printer is not ready

The printer is not ready to print, but no error exists (for example, during 
power-up).

processing data

processing data

The printer is receiving and processing an image, but is not yet 
printing.

printing 

printing 

Printing is in progress; this includes feeding and ejecting paper.

waiting for data

waiting for data

The printer is receiving an image, but the image is not being 
transmitted as fast as the printer can accept it.

resetting

resetting printer

The controller is resetting the print engine because of a condition that 
would not clear.

cleaning heads

cleaning heads

Head cleaning is in progress.

out of paper

out of paper

There is no paper in the input tray, or the paper is not inserted 
correctly.

ink out:  color

add ink:  color

One or more ink cartridges are out of ink.  The color that is out of ink 
appears in the message.

paper jam

paper jam

The printer is reporting a media jam due to a media jam or an incorrect 
page size.

empty waste ink

waste ink tank full

The waste ink tank is almost full.  When it becomes full, the printer will 
not operate until the waste ink tank is replaced (see ÒSpecial notes 
regarding the empty waste ink messageÓ on page 6-19).

internal error

internal interface 
error

The controller and print engine are not communicating correctly.  Reset 
the printer; if the error persists, the printer requires service.

service call:  xx

service call:  xx

The print engine has reported an unrecoverable error; the print engine 
reports a two-digit hexadecimal error code.  These codes are 
described in the table ÒService call error codesÓ on page 6-19.  Reset 
the printer; if the error persists, the printer requires service.