Xerox Phaser 240 Mode D'Emploi
7
Front and Rear Panels
7-2
Phaser 240 Color Printer
JAM
Media is jammed inside the
printer.
printer.
The printer has failed to pick up
the media for a print job.
Remove the paper tray and put
it back in to clear the error. It
may be necessary to clean the
paper pick rollers. See
ÒCleaning the paper-pick rollersÓ
on page 4-6.
the media for a print job.
Remove the paper tray and put
it back in to clear the error. It
may be necessary to clean the
paper pick rollers. See
ÒCleaning the paper-pick rollersÓ
on page 4-6.
Normal operation: there are no
media jams.
media jams.
MEDIA
There is no media in the
selected tray, or the selected
tray is not installed.
selected tray, or the selected
tray is not installed.
The media in the selected tray is
the wrong size for that tray.
the wrong size for that tray.
Media is ready to feed.
COVER
The top cover or the front cover
is open. The printer does not
print while covers are open.
is open. The printer does not
print while covers are open.
Not applicable.
Normal operation: the top cover
and front cover are closed.
and front cover are closed.
RIBBON
At least 75% of the transfer roll
is used up. The printer can
make prints with the remainder
of the transfer roll.
is used up. The printer can
make prints with the remainder
of the transfer roll.
Transfer roll is used up or not
installed. This light will also
blink if a non-Tektronix transfer
roll is installed.
installed. This light will also
blink if a non-Tektronix transfer
roll is installed.
Normal operation: less than
75% of the transfer roll is used
up. The transfer roll is ready to
make prints.
75% of the transfer roll is used
up. The transfer roll is ready to
make prints.
Front panel status descriptions (cont'd.)
Indicator
On
Blinking
Off