Xerox Phaser 300X Guide De Montage
Printing From a PC
3
Printing Reference
3-7
7.
In the Install PostScript Printer from PPD dialog box, select the
directory and drive for the printer’s CD-ROM and the ADOBEPS4
directory. Select your printer, then click Next.
directory and drive for the printer’s CD-ROM and the ADOBEPS4
directory. Select your printer, then click Next.
■
Select Tektronix Phaser 300X if you have the standard version
of the printer.
of the printer.
■
Select Tektronix Phaser 300X Extended if you have the printer’s
Extended Features option.
Extended Features option.
Note
If you are not sure which configuration of the printer you have,
the printer’s startup page lists this information under Extended
Features: Yes/No
the printer’s startup page lists this information under Extended
Features: Yes/No
copy of the printer’s startup page.
8.
In the Local Port Selection dialog box, select the port you want to
use, then click Next. (You can configure the port in this dialog box
at any time.)
use, then click Next. (You can configure the port in this dialog box
at any time.)
9.
In the Add Printer dialog box, type in the printer’s name, select
the printer as default, and decide if you want to print a test page.
Click Next to continue.
the printer as default, and decide if you want to print a test page.
Click Next to continue.
10.
If you see the Different Versions Detected dialog box, click Next
to update the files from the printer’s CD-ROM.
to update the files from the printer’s CD-ROM.
11.
When the installation is finished, the Tektronix Phaser 300X
Properties
Properties
dialog box appears. Make selections in the driver,
referring to page 3-8 for more information on printer options.
Refer to the Adobe PostScript Printer Driver User Guide on the
printer’s CD-ROM (USRGUIDE.PDF) for more detailed
information on the AdobePS 4 driver.
printer’s CD-ROM (USRGUIDE.PDF) for more detailed
information on the AdobePS 4 driver.