Xerox DocuTech 6100 Production Publisher Mode D'Emploi

For the Nuvera family of printers, you must use the following script 
to set up Stackers and/or Finishers: 

1.  Open a terminal window. 

2.  Login as root. 

3. Type 

cd /opt/XRXnps/bin/DFA_IsStacker. 

4. Press 

<Enter>. 

5. Type 

./set –f 0 OR ./set –f 1. Use the value 0 if the 

attached DFA device is a finisher, or use the value of 1 if 
the attached DFA device is a stacker. Note that there are 
spaces before and after the –f switch. 

6. Restart 

DocuSP. 

Prior to DocuSP 4.0, the controller applied the LPR gateway 
filename to submitted documents as opposed to the internally set 
document name.  Starting with DocuSP 4.0, the controller applies 
the internal document name to the job. 

To set the DocuSP to the pre-4.0 behavior, run the following script:  

1.  Open a terminal window. 

2.  Login as root. 

3. Type 

enablePre40LPRBehavior 

4. Press 

<Enter>. 

5.  To disable the pre-4.0 LPR behavior, type 

disablePre40LPRBehavior 

6. Restart 

DocuSP.