Xerox DocuTech 6100 Production Publisher Fascicule

Hints and Tips

System Guide

9-9

To start the trace, perform the following: 

1. Login as Administrator.
2. Select [System - Online Manager].
3. Select:

•

Channel Gateway - Enable

•

Input Device - Online

•

Input Control - Start

4. Submit a job from the host.
5. After the job is completely received by the Controller, 

select Input Control - End.

6. Open a Terminal window.
7. Type cd /opt/XRXnps/XRXgrpset/bin and press Enter.
8. Type ./dspTrc  FileName.txt and press Enter.
9. Type ls -l and press Enter to see the new file and the file 

size.

10. If the file size is greater than 1.44 MB, type compress 

FileName.txt and press Enter. If the file size is less than 
1.44 MB, go to Export the trace file to floppy.

To export the trace file to a floppy, perform the following:

1. Insert a blank, formatted floppy into the floppy drive.
2. Type volrmmount -i and press Enter.
3. If you used the compress command above, type cp 

FileName.txt.Z /floppy/floppy0 and press Enter. If you 
did not use the compress command above, type cp 
FileName.txt /floppy/floppy0 and press Enter.

4. Type eject and press Enter.

Utility

Change Description

Focus

/opt/XRXnps/bin/setascii decomposer

Forced ASCII files through designated 
decomposer (tha tis, ASCII through 
PCL). Implemented in queue manager 
in 2.1

Black and 
white

/opt/XRXnps/bin/setfifomode

Enables FIFO job reception mode in 
front end of system.

Both