Xerox DocuTech 180 HighLight Color System Mode D'Emploi
3-32
DocuTech 128/155/180 HighLight Color Operator Guide
Routine maintenance
2. Ensure that the brush on the wire module is at the toner bottle
end as shown in the figure below.
Figure 3-30 Wire module assembly brush location.
3. Snap the wire module retainer springs behind the tabs.
4. Slide the HLC developer module into the machine.
5. Latch the CCU into place.
6. Remove the cart or service stand.
7. Close the doors.
4. Slide the HLC developer module into the machine.
5. Latch the CCU into place.
6. Remove the cart or service stand.
7. Close the doors.