Xerox FlowPort Support & Software Guide De Montage

September 5, 2001

Version 2.1.1 SP1 Pre-Installation Checklist

G 

Microsoft Windows NT 4.0 or Windows 2000 Server

G 

Xerox Document Centre*, WorkCentre** or Internet Fax Device

*

Currently supported Document Centres include: 220/230/332/340, 240 (printing only)/255/265,
250/350/400, 420/425/432/440, 451/551, 460/470/480/490.

*

Currently supported Fuji Xerox Document Centres include: 250/350/400/451/551

** Currently supported WorkCentre Pro models include 685/785/416Si

G 

Microsoft Windows NT 4.0 Server with Service Pack 6A
or Windows 2000 Server with Service Pack 1

G 

Pentium II, III, Pro or equivalent, 200 MHz or faster

G 

 512 MB recommended for FlowPort server (256 MB RAM minimum).  Additional memory is
required if FlowPort is installed on a multi-purpose server.

G 

500 MB free hard disk drive space

G 

200-400 MB virtual memory

G 

TCP/IP network protocol enabled

G 

Static IP address (recommended)

G 

Domain Naming System (DNS) host name assigned (recommended, required if using Internet Fax)

G 

Three unused IP ports: 21 and 25 required, plus one other port (80 recommended)

G 

No FTP or mail server (e.g. MS Exchange) on the same server as FlowPort

G 

Scan-To-File enabled

G 

TCP/IP enabled

G 

LPR enabled

G 

DNS host name or static IP address assigned

G 

TCP/IP enabled

G 

DNS host name, static IP address or DHCP (requirements vary by manufacturer)

G 

SMTP enabled mail server (e.g. MS Exchange)

G 

Domain Naming System server (optional but recommended)

G 

Microsoft Internet Explorer 4.0, version 4.72 to 5.0, or Netscape Navigator, version 4.5.1 to 4.77
(version 4.77 recommended)

G 

Viewer that supports multi-page TIFF email attachments, such as Imaging for Windows or Pagis 2.06
Viewer