Acer 8KB-FV1 KB.I0800.004 Manuel D’Utilisation
Codes de produits
KB.I0800.004
Chapter 3
89
LCD Module Disassembly Process
IMPORTANT: Cable paths and positioning may not represent the actual model. During the removal and
replacement of components, ensure all available cable channels and clips are used and that the cables are
replaced in the same position.
replacement of components, ensure all available cable channels and clips are used and that the cables are
replaced in the same position.
NOTE: These disassembly procedures feature the 3G model only, therefore there are four antenna cables (white,
black, yellow, and blue) addressed during the procedure. If 3G is not supported, only the WLAN antennas (white
and black) need to be removed.
black, yellow, and blue) addressed during the procedure. If 3G is not supported, only the WLAN antennas (white
and black) need to be removed.
LCD Module Disassembly Flowchart
Screw List
Step
Screw
Quantity
Part No.
LCD Bezel
M2*5
6
86.S0207.002
LCD Panel
M2*3
2
LCD Brackets
M2*3
4
Remove
LCD Panel
Remove
LCD Bezel
Remove
LCD FPC Cable
Remove LCD
Panel from Main
Unit before
proceeding
proceeding
Remove
LCD Brackets
Remove
WLAN Antennas
Remove
Camera Module
Remove
Microphone
Board
Remove
3G Antennas