Xerox DocuColor 12 Printer with Fiery EX12 Guide De Montage

If users cannot connect to the Fiery, check the following:

• Fiery Setup—the appropriate network protocol must be enabled, with the correct 

parameters (for example, for TCP/IP, the IP address), and you must publish either 
the Print queue or Hold queue. 

You can check these settings quickly by printing a Configuration page.

• On the client workstation—the appropriate network protocol(s) must be loaded, 

and your Windows directory should contain a configured Efinl.ini file.

If there is a problem connecting to the Fiery, an error message is displayed.

The problem can occur when:

• The Fiery is first turned on

• The Fiery restarts

• You have changed settings affecting the server address and have not reconfigured the 

connection to the server

If you see this problem, try the following solutions, in this order:

• A remote workstation running Fiery utilities or Fiery WebTools may be interfering 

by obtaining status information. If possible, close the remote application, and try to 
connect again.

• Restart the Command WorkStation software and try to connect again.

• Check the configuration of the connection and modify it, if necessary, or delete the 

Efinl.ini file and start over with the process of configuring the connection as 
described in the 

For Windows9x/Me, the Efinl.ini file is located in \WINDOWS.
For Windows NT 4.0/2000, the Efinl.ini file is located in \WINNT.

• Restart the Fiery.

For information on other error conditions, see the 

.