Xerox DigiPath Professional Production Software Support & Software Mode D'Emploi
19 – 7
TROUBLESHOOTING
Frequently Asked Questions — continued
Question
Answer
How do I format a MOD (Magneto Optical Disk)?
Refer to the DigiPath 3.0 System Administrator Guide for
complete instructions on formatting a MOD. Here is a
summary:
complete instructions on formatting a MOD. Here is a
summary:
You must be logged in as Administrator.
1.
1.
Place a blank MOD platter in the MOD drive. Be sure
that the side you wish to prepare is face up.
that the side you wish to prepare is face up.
2.
From the Windows taskbar, select [Start: Programs:
Administrative Tools: Disk Administrator].
3.
Select [OK] if you receive a warning regarding Disk
Administrator.
4.
Select [OK] at the next warning regarding Disk
Administrator, as well.
5.
If prompted to write the disk signature, select [Yes].
6.
Select the area that represents the MOD. (It is usually
Disk 1, and may read FREE SPACE.)
7.
Select [Partition: Create] from the Disk Administrator
menu bar.
8.
Select [OK] to make the partition the full size.
9.
Select [Partition: Commit Changes Now] from the
menu bar.
10. Select [Yes] to confirm the changes.
11. Select [OK] at the Disks were updated successfully
11. Select [OK] at the Disks were updated successfully
message.
12. Select the MOD area again.
13. Select [Tools: Format] from the menu bar. The
13. Select [Tools: Format] from the menu bar. The
Format dialog box displays.
14. In the File System drop-down list box, select [FAT].
…continued