Xerox DocuColor 12 Printer with Fiery EX12 Manuel De L’Administrateur
SELECTING AN AREA SHAPE
5-8
DOCUCOLOR 12 EDIT PAD GUIDE
3
4
5
6
7
Edit
Pad
5
6
Select Rectangle Area.
NOTE: To select a different Area Shape, select
the desired Area Shape. The selected Area
Shape lights.
the desired Area Shape. The selected Area
Shape lights.
7
Mark two points using the Edit Pen. These points
must be the opposite corners of the area to be
edited. The system uses these two points to form
a rectangle as shown in the example below.
must be the opposite corners of the area to be
edited. The system uses these two points to form
a rectangle as shown in the example below.
•
When you make the second point, a single
tone sounds indicating the area has been
saved. A double tone indicates you did not
define the area correctly and you must repeat
the procedure.
tone sounds indicating the area has been
saved. A double tone indicates you did not
define the area correctly and you must repeat
the procedure.
•
You can continue to define more Rectangle
Areas without selecting Rectangle Area on
the Edit Pad Control Panel again.
Areas without selecting Rectangle Area on
the Edit Pad Control Panel again.
NOTE: The defined area of the copy may reflect a
0.5 mm misregistration.
0.5 mm misregistration.