Xerox DocuColor 12 Printer with Fiery X12 Guide De Montage

In Network Setup, when you configure the IPX (Novell) connection, the Fiery queries 
the network for Novell file servers and trees, and attaches to them temporarily. If a 
guest login is enabled, it will be used. If not, you’ll be prompted to log in from the 
Command WorkStation.

If the selected NetWare file server or tree does not have a guest account, or if the guest 
account has expired or has been disabled by the NetWare supervisor, you will be 
prompted to notify the IPX (Novell) administrator. In that case, there are two options:

• Enable a guest account on the NetWare server or tree for the purpose of setup.

• Log in with a different account. At the 

ENTER LOGIN NAME

 screen, change the default 

name (

guest

) to 

supervisor

 or enter another valid login name. When you are 

prompted for a password, enter the correct password for the account you named.

For any Novell error, make sure:

• Your IPX (Novell) network is connected to the Fiery.

• The NetWare server you are trying to access is running.

• The Novell network has been configured with at least one print server and queue for 

the Fiery.

• You have the appropriate permissions and login information, including username 

and password, if necessary.

• The Fiery is configured with the correct frame types for communication with the 

desired Novell servers.

Any Bindery Setup screen

Novell error code, followed by 
a message.

Novell NetWare has reported an error. The 
Command WorkStation reports the error number and 
displays a brief message. 
For the most common errors (listed in the following table), 
a screen is displayed that enables you to retry the action 
that evoked the error, such as adding a server. If that is not 
possible, you are prompted to notify the Novell 
administrator, who will need to troubleshoot the network.
Consult NetWare Administrator documentation for 
further explanation of Novell error codes.