Craftsman 54931 Manuel D’Utilisation
Fasten the Door Bracket (Continued)
ONE-PIECE DOORS
Please read and comply with the warnings and reinforcement
instructions on the previous page. They apply to one-piece doors
also.
Please read and comply with the warnings and reinforcement
instructions on the previous page. They apply to one-piece doors
also.
l
Center the door bracket on the top of the door, in line with the
header bracket as shown. Mark either the left and right, or the
top and bottom holes.
header bracket as shown. Mark either the left and right, or the
top and bottom holes.
l
Metal Doors: Drill 3/16" pilot holes and fasten the bracket
with the 1/4"-14x5/8" self-threading screws provided.
with the 1/4"-14x5/8" self-threading screws provided.
l
Wood Doors: Drill 5/16" holes and use 5/16"x2" carriage bolts,
lock washers and nuts (not provided) or 5/16"x1-1/2" lag
screws (not provided) depending on your installation needs.
lock washers and nuts (not provided) or 5/16"x1-1/2" lag
screws (not provided) depending on your installation needs.
NOTE: The door bracket may be installed on the top edge of the
door if required for your installation. (Refer to the dotted line
optional placement drawing.)
door if required for your installation. (Refer to the dotted line
optional placement drawing.)
Header Wall
Vertical
Centerline of
Garage Door
Centerline of
Garage Door
Optional
Placement
of Door
Bracket
Placement
of Door
Bracket
Header
Bracket
Door
Bracket
Bracket
2x4 Support
For a door with no exposed framing,
or for the optional installation, use
lag screws 5/16"x1-1/2" (Not Provided)
to fasten door bracket.
or for the optional installation, use
lag screws 5/16"x1-1/2" (Not Provided)
to fasten door bracket.
Top of Door
(Inside Garage)
(Inside Garage)
Door
Bracket
Bracket
Optional
Placement
Placement
Top Edge
of Door
of Door
Self-Threading
Screw
1/4"-14x5/8"
Screw
1/4"-14x5/8"
Door
Bracket
Bracket
Top of Door
(Inside Garage)
(Inside Garage)
Carriage Bolt
5/16"x2"
(Not Provided)
5/16"x2"
(Not Provided)
Optional
Placement
Placement
Lock
Washer
5/16"
Washer
5/16"
Nut
5/16"-18
5/16"-18
Top Edge
of Door
of Door
METAL DOOR
WOOD DOOR
HORIZONTAL AND VERTICAL
REINFORCEMENT IS NEEDED
FOR LIGHTWEIGHT GARAGE
DOORS (FIBERGLASS, ALUMINUM,
STEEL, DOORS WITH GLASS
PANEL, ETC.). (NOT PROVIDED)
REINFORCEMENT IS NEEDED
FOR LIGHTWEIGHT GARAGE
DOORS (FIBERGLASS, ALUMINUM,
STEEL, DOORS WITH GLASS
PANEL, ETC.). (NOT PROVIDED)
Finished Ceiling
Self-Threading Screw
1/4"-14x5/8"
1/4"-14x5/8"
HARDWARE SHOWN
ACTUAL SIZE
21