Craftsman 54931 Manuel D’Utilisation

Programming

Your garage door opener has been programmed at the factory to operate with your remote control. Older Craftsman

accessories

are not compatible, see page 46 for compatible accessories. Programming can be done through the door control or the learn button on
the garage door opener. To program additional remote controls refer to the instructions provided with the additional remote controls.
IMPORTANT NOTE: If your vehicle is equipped with a Homelink

, you may require an external adapter depending on the make, model

and year of your vehicle. Visit www.homelink.com for additional information.

PROGRAM A REMOTE USING THE LEARN BUTTON

1. Press and release the Learn button on

the garage door opener. The Learn
indicator light will glow steadily for 30
seconds.

2. Within 30 seconds, press and hold the

button on the remote control.

3. Release the button when the garage door

opener light blinks. It has learned the
code. If light bulbs are not installed, two
clicks will be heard.

When replacing the light lens cover, ensure the antenna wires are
hanging straight down.

TO ADD, REPROGRAM, OR CHANGE A REMOTE
CONTROL/KEYLESS ENTRY PIN USING THE SMART CONTROL
PANEL

TO REMOTE

TO RE

ABC

DEF

GHI

JKL

MNO

PRS

TUV

WXY

ENTER

0 QZ

ENTER

1. Press the navigation button below

"MENU" to view the Features menu.

2. Use the navigation buttons to scroll to

"PROGRAM" and press the navigation
button under

to continue.

3. Select "REMOTE" or "KEYPAD" to

program from the program menu.
Press

to continue.

4. Press the button on the remote control

that you wish to operate your garage
door.
OR
Enter a 4-digit personal identification
number (PIN) of your choice on the
keyless entry keypad. Then press the
ENTER button.