Zanussi ZCV667MWC Manuel D’Utilisation

• Wire shelf

For cookware, cake tins, roasts.

• Grill- / Roasting pan

To bake and roast or as pan to collect fat.

• Trivet

For roasting and grilling.

Use the trivet only with the Grill- /

roasting pan.

Refer to Safety chapters.

Remove all accessories from the appliance.

Refer to "Care and cleaning"

chapter.

1. Clean the appliance before first use.

2. Put the accessories back to their initial

position.

You must set the time before you operate the

oven.

Only the top oven works without the

set time.

The indicator for the Time of day function

flashes when you connect the appliance to the

electrical supply, when there was a power cut

or when the timer is not set.

Press the   or   button to set the correct

time.

After approximately five seconds, the flashing

stops and the display shows the time of day you

set.

You cannot change the time of day if
the Duration 

 or End 

 function

operates.

Press   again and again until the indicator for

the Time of Day function flashes.

To set a new time, refer to "Setting the time".

Preheat the empty appliance to burn off the

remaining grease.

Preheat the two ovens. Heat up one

oven at a time.

1. Set the maximum temperature.

2. Let the appliance operate for 1 hour.

Accessories can become hotter than usual. The

appliance can emit an odour and smoke. This is

normal. Make sure that the airflow is sufficient.

Refer to Safety chapters.

Off position

Heat settings

Use the residual heat to decrease

energy consumption. Deactivate the

cooking zone approximately 5 - 10

minutes before the cooking process

is completed.

Turn the knob to a necessary heat setting.

To complete the cooking process, turn the knob

to the off position.

There is a risk of burns from residual

heat.