Zanussi ZCV680TCWA Manuel D’Utilisation

The door glass in your product can be

different in type and shape from the

example you see in the image. The

number of glasses can also be

different.

1. Push the door trim at one side to remove it.

2. Pull up the trim.

3. Remove the glass panels.

To replace the glass panels, do the

same steps in reverse. Before you

lower the trim, attach the A trim part to

the door. Refer to the image.

REPLACING THE LAMP
Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

WARNING! Danger of electrocution!

Disconnect the fuse before you

replace the lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The lamp glass cover is at the back of

the cavity.

1. Turn the lamp glass cover counterclockwise to

remove it.

2. Clean the glass cover.

3. Replace the oven lamp with a suitable 300 °C

heat-resistant oven lamp.

Use the same oven lamp type.

4. Install the glass cover.

WARNING! Refer to Safety chapters.

You cannot activate the appli-

ance.

The appliance is not connec-

ted to an electrical supply or it

is connected incorrectly.

Check if the appliance is cor-

rectly connected to the electri-

cal supply.

You cannot activate the appli-

ance.

The fuse is blown.

Make sure that the fuse is the

cause of the malfunction. If the

fuse is blown again and again,

contact a qualified electrician.

Residual heat indicator does

not come on.

 The zone is not hot because it

operated only for a short time.

If the zone operated sufficiently

long to be hot, speak to an Au-

thorised Service Centre.