Juniper Enhanced DPC DPCE-R-20GE-2XGE Manuel D’Utilisation
Codes de produits
DPCE-R-20GE-2XGE
•
Fiber-optic small form-factor pluggable (SFP) transceivers:
•
Connector: Duplex LC/PC (Rx and Tx)
•
100BASE-FX (model number: SFP-1FE-FX)
•
1000BASE-LH (model number: SFP-1GE-LH)
•
1000BASE-LX (model number: SFP-1GE-LX)
•
1000BASE-SX (model number: SFP-1GE-SX)
Optical interface specifications—see Gigabit Ethernet 1000BASE Optical Interface Specifications
•
Copper SFP transceivers:
•
Connector: Four-pair, Category 5 shielded twisted-pair connectivity through an RJ-45
connector
connector
•
1000BASE-T (model number: SFP-1GE-T)
•
10/100/1000BASE-T (model number: SFP-1GE-FE-E-T)
NOTE:
SFP-1GE-FE-E-T supports tri-rate 10/100/1000 mode in Junos OS Release 9.4 and later
•
Pinout: MDI, MDI crossover
•
Length: 328 ft/100 m
Copper interface specifications—see Ethernet 10BASE-T Copper Interface Specifications, Fast
Ethernet 100BASE-T Copper Interface Specifications, and Gigabit Ethernet 1000BASE-T Copper
Interface Specifications
Ethernet 100BASE-T Copper Interface Specifications, and Gigabit Ethernet 1000BASE-T Copper
Interface Specifications
•
Bidirectional SFP transceivers:
•
Connector: Duplex LC/PC (Rx and Tx)
•
1000BASE-BX (model number pairs: SFP-GE10KT13R14 with SFP-GE10KT14R13,
SFP-GE10KT13R15 with SFP-GE10KT15R13, SFP-GE40KT13R15 with SFP-GE40KT15R13)
SFP-GE10KT13R15 with SFP-GE10KT15R13, SFP-GE40KT13R15 with SFP-GE40KT15R13)
Optical interface specifications—see Fast Ethernet and Gigabit Ethernet Bidirectional SFP
Optical Interface Specifications
Optical Interface Specifications
Cables and connectors
OK/FAIL
LED, one bicolor:
•
Green—MIC is functioning normally.
•
Yellow—MIC has failed.
Link LED, one green per port:
•
Off—No link.
•
On steadily—Link is up with no activity.
•
Blinking—Link is up and is active.
LEDs
123
Copyright © 2012, Juniper Networks, Inc.
Gigabit Ethernet MIC with SFP