Beko GNE 134620 X Manuel D’Utilisation

EN

26

You can install the egg holder to the 
desired door or body shelf.
Never store the egg holder in the 
freezer compartment

 Sliding body shelves can be pulled 
by slightly lifting up from the front and 
moved back and forth. They come to 
a stop point when pulled towards front 
to allow you reach the foods placed at 
the back of the shelf; when it is pulled 
after slightly lifted upwards at the 
second stop point, the body shelf will 
be released.
The shelf should be hold tightly from 
the bottom as well in order to prevent 
it from tipping over. The body shelf is 
placed on the rails at the sides of the 
refrigerator body by bringing it to one 
lower or one upper level.
The body shelf should be pushed 
backwards to seat it completely.

Crisper of your refrigerator is designed 
specially to keep your vegetables 
freshly without loosing their humidity. 
For this purpose, cool air circulation 
occurs around the crisper in general. 
Remove the door shelves that align 
with the crisper before removing the 
crispers.  You can remove the crispers 
as illustrated in the figure.

Chiller compartments enable the 
foods to be frozen become ready 
for freezing. You can also use these 
compartments to store your food at a 
temperature a few degrees below the 
fridge compartment.
You can increase the inner volume of 
your refrigerator by removing any of 
the chiller compartments. To do this, 
pull the compartment towards yourself; 
the compartment will lean against the 
stopper and stop. This compartment 
will be released when you lift it about 1 
cm and pull it towards yourself.