Cisco Cisco Clean Access 3.5
4-30
Cisco Clean Access Manager Installation and Administration Guide
OL-7044-01
Chapter 4 Switch Management and Cisco Clean Access Out-of-Band (OOB)
Configure OOB Switch Management in the CAM
The Port Bounce Interval is the time delay between turning off and turning on the port. This delay
is inserted to help client machines issue DHCP requests.
is inserted to help client machines issue DHCP requests.
7.
Click Update to save settings.
Add Managed Switch
The pages under the Switch Management > Devices > Switches tab are used to discover and add new
managed switches within an IP range, add new managed switches by exact IP address, and administer
the list of managed switches. There are two methods to add new managed switches
managed switches within an IP range, add new managed switches by exact IP address, and administer
the list of managed switches. There are two methods to add new managed switches
•
•
Figure 4-19
List of Switches
The list of switches under Switch Management > Devices > Switches > List displays all switches added
from the New or Search forms. Switch entries in the list include the switch’s IP address, MAC address,
Description, and Switch Profile. You can sort the entries on the list by Switch Group, Switch Profile,
or Port Profile dropdowns, or you can simply type a Switch IP and hit Enter to search for a switch by
its address. Additionally the List provides one control and three buttons:
from the New or Search forms. Switch entries in the list include the switch’s IP address, MAC address,
Description, and Switch Profile. You can sort the entries on the list by Switch Group, Switch Profile,
or Port Profile dropdowns, or you can simply type a Switch IP and hit Enter to search for a switch by
its address. Additionally the List provides one control and three buttons:
•
Profile—Clicking the Profile link brings up the Switch Profile (
•
Config — Clicking the Config button brings up the
for the switch.
•
Ports — Clicking the Ports button brings up the
for the switch.
•
Delete — Clicking the Delete button deletes the switch from the list (a confirmation dialog will
appear first).