Cisco Cisco IOS Software Release 12.2(4)B
VPDN Group Session Limiting
Monitoring and Maintaining VPDN Group Session Limiting
5
Cisco IOS Release: Multiple releases (see the Feature History Table)
NAS: cliford_ball, IP address = 172.25.52.8, CLID = 2
Gateway: great_went, IP address = 172.25.52.7, CLID = 13
Log time: 00:04:21, Error repeat count:1
Failure type: Exceeded configured VPDN mazimum session limit
Failure reason:
Monitoring and Maintaining VPDN Group Session Limiting
Use the following commands to monitor and maintain VPDN group session limiting:
Command
Purpose
Router# show vpdn group name
Displays the session-limit set, and the number of
active sessions and tunnels on the specified VPDN
group.
active sessions and tunnels on the specified VPDN
group.
•
name—VPDN group name summarizes the
configuration of the specified group.
configuration of the specified group.
Router# show vpdn
Displays a summary of all active VPDN tunnels.
Router# show vpdn history failure
Displays information about VPDN user failures.
Router# show vpdn session [all [interface | tunnel |
username
] | packets | sequence | state | timers | window]
Displays VPDN session information including
interface, tunnel, username, packets, status, and
window statistics.
interface, tunnel, username, packets, status, and
window statistics.
•
all—All session information for active
sessions.
sessions.
–
interface—Interface associated to a
specific session.
specific session.
–
tunnel—Tunnel attribute filter.
–
username—Username filter.
•
packets—Packet/byte count.
•
sequence —Sequence numbers.
•
state—State of each session.
•
timers—Timer information.
•
window—Window information.