Cisco Cisco Expressway Manuel De Maintenance
n
when the requested bandwidth for the call exceeds the lowest per-call limit for the subzone or pipes
n
when placing the call at the requested bandwidth would mean that the total bandwidth limits for that
subzone or pipes would be exceeded
subzone or pipes would be exceeded
You can turn off downspeeding, in which case if there is insufficient bandwidth to place the call at the
originally requested rate, the call will not be placed at all. This could be used if, when your network is nearing
capacity, you would rather a call failed to connect at all than be connected at a lower than requested speed.
In this situation endpoint users will get one of the following messages, depending on the system that initiated
the search:
originally requested rate, the call will not be placed at all. This could be used if, when your network is nearing
capacity, you would rather a call failed to connect at all than be connected at a lower than requested speed.
In this situation endpoint users will get one of the following messages, depending on the system that initiated
the search:
n
"Exceeds Call Capacity"
n
"Gatekeeper Resources Unavailable"
Cisco Expressway Administrator Guide (X8.5)
Page 181 of 394
Bandwidth control
About bandwidth control