Cisco Cisco NSS030 Smart Storage External Power Adapter Manuel De Maintenance
Managing the System
Backup
Cisco Small Business NSS300 Series Smart Storage Administration Guide
224
3
STEP 4
From the Add IP Address window, configure the following parameters:
•
IP Address Format—From the drop-down list, select IPv4 or IPv6.
•
Single IP Address—Enable to add a single IP address.
-
IP Address—Enter the IP address you want to add.
•
Specify IP addresses of certain network by setting IP address and
netmask—Enable to add a range of IP addresses and netmask.
netmask—Enable to add a range of IP addresses and netmask.
-
IP—Enter the start IP address.
-
Subnet Mask—From the drop-down lists, select the subnet mask and
enter the subnet mask for the range of IP addresses. The default subnet
mask is 255.0.0.0.
enter the subnet mask for the range of IP addresses. The default subnet
mask is 255.0.0.0.
•
Access Right—From the drop-down list, select Read/Write access or Read
Only access.
Only access.
STEP 5
Click Finish to complete adding the IP address.
STEP 6
Click Apply to save the RTRR server settings and reboot the NAS.
Backup
The NAS allows numerous ways to backup the data on the NAS internal drives.
This section includes the following topics regarding backing up your data:
This section includes the following topics regarding backing up your data:
•
•
•
•
•