Cisco Cisco Email Security Appliance C160 Mode D'Emploi

When you are ready to install the upgrade, follow these instructions from the beginning, including 
the prerequisites in the Before You Begin section, but choose the Install option. 

If you installed the upgrade: 

Re-enable (resume) the listeners. 

Save a configuration file for the new system. For information, see 

. 

After upgrade is complete, re-enable listeners. 

Choose System Administration > System Upgrade. 

Click Upgrade Options. 

Choose an option: 

(Optional) View the Upgrade Logs. 

The ability to remotely reset the power for the appliance chassis is available only on the following 
hardware: C380 and C680. 

If you want to be able to remotely reset appliance power, you must enable and configure this 
functionality in advance, using the procedure described in this section. 

Cable the dedicated Remote Power Management port directly to a secure network. For information, 
see the Hardware Installation Guide. 

Ensure that the appliance is accessible remotely; for example, open any necessary ports through the 
firewall. 

View download status

Look in the middle of the page. 

If there is no download in progress and no completed download 
waiting to be installed, you will not see download status information. 

Cancel a download 

Click the Cancel Download button in the middle of the page. 

This option appears only while a download is in progress. 

Delete a downloaded installer 

Click the Delete File button in the middle of the page. 

This option appears only if an installer has been downloaded.