Cisco Cisco Content Security Management Appliance M1070 Mode D'Emploi
2-11
AsyncOS 8.3.7 for Cisco Content Security Management User Guide
Chapter 2 Setup, Installation, and Basic Configuration
Running the System Setup Wizard
Note
Verify that you have connected the Security Management appliance to your network through the
Management port.
Management port.
Network Settings
Enter the fully qualified hostname for the Security Management appliance. This name should be
assigned by the network administrator.
assigned by the network administrator.
Enter the IP address of the Security Management appliance.
Enter the network mask and IP address of the default router (gateway) on your network.
Next, configure the Domain Name Service (DNS) settings. AsyncOS contains a high-performance
internal DNS resolver/cache that can query the Internet’s root servers directly, or the system can use
DNS servers that you specify. If you use your own servers, you need to supply the IP address of each
DNS server. You can enter up to four DNS servers when you are using the System Setup Wizard.
internal DNS resolver/cache that can query the Internet’s root servers directly, or the system can use
DNS servers that you specify. If you use your own servers, you need to supply the IP address of each
DNS server. You can enter up to four DNS servers when you are using the System Setup Wizard.
Note
The DNS servers you specify have an initial priority of 0. For more information, see the
.
Note
The appliance requires access to a working DNS server to perform DNS lookups for incoming
connections. If you cannot specify a working DNS server that is reachable by the appliance while you
are setting up the appliance, you can select Use Internet Root DNS Servers, or else temporarily specify
the IP address of the Management interface so that you can complete the System Setup Wizard.
connections. If you cannot specify a working DNS server that is reachable by the appliance while you
are setting up the appliance, you can select Use Internet Root DNS Servers, or else temporarily specify
the IP address of the Management interface so that you can complete the System Setup Wizard.
Review Your Configuration
Now, the System Setup Wizard displays a summary of the setup information that you have entered. If
you need to make any changes, click Previous at the bottom of the page and edit the information.
you need to make any changes, click Previous at the bottom of the page and edit the information.
After you have reviewed the information, click Install This Configuration. Then click Install in the
confirmation dialog box that appears.
confirmation dialog box that appears.
Proceeding to the Next Steps
If the System Setup Wizard properly installs the configuration on the Security Management appliance,
the System Setup Next Steps page appears.
the System Setup Next Steps page appears.
Click on any of the links on the System Setup Next Steps page to proceed with the configuration of your
Cisco Content Security appliances.
Cisco Content Security appliances.
After you install the Security Management appliance and run the System Setup Wizard, you can modify
other settings on the appliance and configure the monitoring services.
other settings on the appliance and configure the monitoring services.
To simplify configuration and troubleshooting, we recommend that you follow the process outlined in