Cisco Cisco ONS 15310-MA SONET Multiservice Platform Références techniques
2
This guide lists TL1 commands and autonomous messages by category. It includes basic descriptions
and input and output formats supported by the Cisco ONS 15310-MA SDH, Cisco ONS 15454 SDH,
Cisco ONS 15454 M2, and Cisco ONS 15454 M6. Refer to the Cisco ONS SDH TL1 Command Guide
for a complete description of TL1 commands.
and input and output formats supported by the Cisco ONS 15310-MA SDH, Cisco ONS 15454 SDH,
Cisco ONS 15454 M2, and Cisco ONS 15454 M6. Refer to the Cisco ONS SDH TL1 Command Guide
for a complete description of TL1 commands.
TL1 commands conform to the following syntax:
a:b:c:d:e: ...z;
where:
“a” is the Command Code.
“b” is the Target Identifier (TID).
“c” is the Access Identifier (AID) or the User Identifier (UID).
“d” is the Correlation Tag (CTAG).
“e: ...z;” are other positions required for various commands.
The TID, AID, and CTAG route and control the TL1 command.
Other parameters provide additional information required to complete the action requested by the
command.
a:b:c:d:e: ...z;
where:
“a” is the Command Code.
“b” is the Target Identifier (TID).
“c” is the Access Identifier (AID) or the User Identifier (UID).
“d” is the Correlation Tag (CTAG).
“e: ...z;” are other positions required for various commands.
The TID, AID, and CTAG route and control the TL1 command.
Other parameters provide additional information required to complete the action requested by the
command.
1
MS-SPRing
Note
The MS-SPRing commands do not apply to the Cisco ONS 15310-MA SDH platform.
Table 1
MS-SPRing
DLT-<MOD_RING>:[<TID>]:<AID>:<CTAG>[:::];
Deletes the multiplex section-shared protection ring (MS-SPRing) of the network element (NE).
ED-<MOD_RING>:[<TID>]:<AID>:<CTAG>:::[RINGID=<RINGID>],[NODEID=<NODEID>],
[RVRTV=<RVRTV>],[RVTM=<RVTM>],[SRVRTV=<SRVRTV>],[SRVTM=<SRVTM>][:];
[RVRTV=<RVRTV>],[RVTM=<RVTM>],[SRVRTV=<SRVRTV>],[SRVTM=<SRVTM>][:];
Edits the MS-SPRing attributes.
ENT-<MOD_RING>:[<TID>]:<AID>:<CTAG>:::[RINGID=<RINGID>],NODEID=<NODEID>,
MODE=<MODE>,[RVRTV=<RVRTV>],[RVTM=<RVTM>],[SRVRTV=<SRVRTV>],
[SRVTM=<SRVTM>],EASTWORK=<EASTWORK>,WESTWORK=<WESTWORK>,
[EASTPROT=<EASTPROT>],[WESTPROT=<WESTPROT>];
MODE=<MODE>,[RVRTV=<RVRTV>],[RVTM=<RVTM>],[SRVRTV=<SRVRTV>],
[SRVTM=<SRVTM>],EASTWORK=<EASTWORK>,WESTWORK=<WESTWORK>,
[EASTPROT=<EASTPROT>],[WESTPROT=<WESTPROT>];
Creates a 2-fiber or 4-fiber MS-SPRing.
EX-SW-<STM_MSSPR>:[<TID>]:<AID>:<CTAG>::,[<SWITCHTYPE>],[<DIRECTION>];
Exercises the algorithm for switching from a working facility to a protection facility without actually
performing a switch.
performing a switch.