Cisco Cisco IOS Software Release 12.2(14)SX
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
HSRP MD5 Authentication
Prior to the introduction of the HSRP MD5 Authentication feature, Hot Standby Router Protocol (HSRP)
authenticated protocol packets with a simple plain text string. The HSRP MD5 Authentication feature is
an enhancement to generate an MD5 digest for the HSRP portion of the multicast HSRP protocol packet.
This feature provides added security and protects against the threat from HSRP-spoofing software.
authenticated protocol packets with a simple plain text string. The HSRP MD5 Authentication feature is
an enhancement to generate an MD5 digest for the HSRP portion of the multicast HSRP protocol packet.
This feature provides added security and protects against the threat from HSRP-spoofing software.
Configuration Information
Configuration information is included in the “Configuring HSRP” module in the “First Hop Redundancy
Protocols” section of the
Protocols” section of the
Cisco IOS IP Application Services Configuration Guide, Release 12.4T,
at the
following URL:
The following section provides information about this feature:
•
Configuring HSRP Authentication
For a complete list of features included in the “Configuring HSRP” module, see the Feature Information
Table located toward the end of the module.
Table located toward the end of the module.
Command Reference Information
Command reference information is included in the Cisco IOS IP Application Services Command
Reference, Release 12.2SX, at the following URL:
Reference, Release 12.2SX, at the following URL:
New or Modified Commands
The following commands are new or modified for this feature:
•
show standby
•
standby authentication