Cisco Cisco IOS Software Release 12.0(22)S
( D R A F T L A B E L ) A L P H A D R A F T - C I S C O C O N F I D E N T I A L
MPLS Traffic Engineering and Enhancements
debug mpls traffic-eng tunnels events
46
Cisco IOS Release 12.0(22)S
debug mpls traffic-eng tunnels events
To print information about traffic engineering tunnel management system events, use the debug mpls
traffic-eng tunnels events privileged EXEC command. To disable debugging output, use the no form of
this command.
traffic-eng tunnels events privileged EXEC command. To disable debugging output, use the no form of
this command.
[ no ] debug mpls traffic-eng tunnels events [ detail ]
Syntax Description
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Examples
In the following example, detailed debugging information is printed about traffic engineering tunnel
management system events:
management system events:
debug mpls traffic-eng tunnels events detail
LSP-TUNNEL:received event:interface admin. down [Ethernet4/0/1]
LSP-TUNNEL:posting action(s) to all-tunnels:
check static LSPs
LSP-TUNNEL:scheduling pending actions on all-tunnels
LSP-TUNNEL:applying actions to all-tunnels, as follows:
check static LSPs
detail
(Optional) Prints detailed debugging information.
Release Modification
12.05(S)
This command was introduced.
12.1(3)T
The detail keyword was added.
12.0(10)ST
This command was integrated into Cisco IOS Release 12.0(10)ST.