Cisco Cisco UCS B440 M1 High-Performance Blade Server Guide De Dépannage

            Package-Vers:

            Update-Status: Ready

            Activate-Status:

            Startup-Vers:

            Backup-Vers: 2.2(3b)

            Bootloader-Vers: 2.2(3a).33

        CIMC:

            Running-Vers: 2.2(3b)

            Package-Vers: 2.2(3b)B

            Update-Status: Ready

            Activate-Status: Ready

            Startup-Vers: 2.2(3b)

            Backup-Vers: 2.2(3b)

            Bootloader-Vers: 2.2(3b).33

In order to recover from this, follow the steps below.

1) Navigate to Equipment > Chassis > Chassis # > Servers > Server # > Installed Firmware tab.

2) Right-click on the component that needs to be updated (e.g. BIOS, CIMC Controller)  and select Update Firmware. In this example, the CIMC Controller
will be updated to 2.2(3b).

3) Select the correct firmware, the Force checkbox and click Apply.

Tip: If it's not clear which version needs to be selected from the dropdown, the network
administrator can navigate to Equipment > Firmware Management > Packages, expand
ucs-k9-bundle-b-series.VERSION.B.bin and look for "ucs-EXM4." There will be three
components: bios (BIOS), brdprog (Board Controller), and cimc (CIMC Controller).

4) Monitor the Installed Firmware tab and wait until the Update Status and Activate Status columns change to Ready and the Backup Version column