Cisco Cisco VC220 Dome Network Camera Manuel De Maintenance
Configuring the Cisco VC 220 Network Camera Software
Network Setting > SNMP
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
53
6
Network Setting > SNMP
Use Network Setting > Simple Network Management Protocol (SNMP) for
network monitoring and control. The Cisco VC 220 supports SNMP version v2c
and traps. When you complete the configuration, click Save to save the settings;
otherwise click Cancel to discard the changes.
network monitoring and control. The Cisco VC 220 supports SNMP version v2c
and traps. When you complete the configuration, click Save to save the settings;
otherwise click Cancel to discard the changes.
•
Enable SNMPv2c—Select this option to enable SNMP.
•
Read/Write community—Enter the names of Read/Write community
according to your network management system. The default is private.
according to your network management system. The default is private.
•
Read only community—Enter the names of Read only community
according to your network management system. The default is public.
according to your network management system. The default is public.
•
Trap Receiver Community String—Set up your network management
system to listen for traps (network management messages) with this string.
The string is the identifier the camera sends to a network management
system. For example “VC220-Warehouse.”
system to listen for traps (network management messages) with this string.
The string is the identifier the camera sends to a network management
system. For example “VC220-Warehouse.”
•
Trap Receiver IP Address—The IP address of the network management
system.
system.