Cisco Cisco Unified MeetingPlace Audio Server Guide De Montage
Cisco MeetingServer 5.1 Installation Planning Guide
57
Cisco Systems
March 2003
Action
Description
9
9
9
9
10.
NTP Server IP
Address
Address
It is recommended you time synchronize your MeetingPlace
system with a Network Time Protocol (NTP) server.
Worksheet 4-8 describes the NTP settings.
system with a Network Time Protocol (NTP) server.
Worksheet 4-8 describes the NTP settings.
11.
Broadcast Traffic
If the rate of broadcast or multicast packet generation on the
LAN segment exceeds an average of 40/second, the Ethernet
link from MeetingPlace into the local LAN must be configured
for 100Mb to avoid congestion of the link.
LAN segment exceeds an average of 40/second, the Ethernet
link from MeetingPlace into the local LAN must be configured
for 100Mb to avoid congestion of the link.
If broadcast and multicast traffic exceeds 100
packets/second, the MeetingPlace system should be
isolated from that segment using a router
packets/second, the MeetingPlace system should be
isolated from that segment using a router
12.
MeetingTime
network
requirements
network
requirements
•
MeetingTime must be able to open a TCP connection on
port 5001 and 5005
port 5001 and 5005
to connect to the network and/or
conference server.
•
For MeetingTime to access recordings and attachments,
the IP address of the conference server must not be
translated
the IP address of the conference server must not be
translated
using a network address translation scheme.
13.
MeetingTime LAN
speed
recommendations
speed
recommendations
Scheduling and monitoring small (2–10 participants)
meetings
•
meetings
•
Required: 28 kbs
•
Recommended: 40 kbs
Monitoring medium meetings (11–60 participants)
•
•
Required: 35 kbs
•
Recommended: 50 kbs
Monitoring large meetings (61–120 participants)
•
•
Required: 50 kbs
•
Recommended: 128 kbs