Cisco Cisco Unified MeetingPlace Audio Server Manuel De Maintenance
4-24
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 4 Configuring the 8112 Server
Configuring the system
Figure 4-28 net Command New Configuration Screen
Step 10
Type
99
and press Enter to quit the “net” command utility.
Configuring the server’s time zone
This section describes how to configure the server’s time zone. If the time zone is not correctly set,
meetings will occur at the wrong time.
meetings will occur at the wrong time.
Step 1
If you do not already have terminal logging turned on, turn it on before proceeding. For information on
logging, see
logging, see
.
Step 2
At the tech$ prompt, enter
timezone
and press Enter.
appears. (For more information about
the “timezone” command, see
.)
meetingplace:tech$ net
1) View the server & site configuration
2) Modify the server configuration
3) Select another server (current unit = #0)
99) Quit
Select: 1
Current server configuration:
Unit: #0 (molson)
Active: YES
Description: MeetingPlace
Kind: Conference server
IP Address: 172.20.21.13
Ethernet address: 0001af0bc2cd
NTP servers: 198.207.208.114 198.207.208.84
Site: #0 (Home Site)
Site subnet mask: 255.255.0.0
Site broadcast addr: 172.20.255.255
Site default gateway: 172.20.1.1
Route daemon: disabled
1) View the server & site configuration
2) Modify the server configuration
3) Select another server (current unit = #0)
99) Quit
Select: