Cisco Cisco Email Security Appliance C170 Guide De Montage
9
10
Log In to the Appliance
You can log in to the Cisco C390 appliance using one of two
interfaces: the web-based interface or the command-line
interface.
interfaces: the web-based interface or the command-line
interface.
Web-Based Interface
Step 1
For web browser access via the Ethernet port (see the
), go to the
appliance’s management interface by entering the
following URL in a web browser:
following URL in a web browser:
http://192.168.42.42
Step 2
Log in with the following credentials:
•
Username: admin
•
Password: ironport
Command-Line Interface
Step 1
Access the command-line interface locally or remotely:
•
To access the CLI locally, set up a terminal to
connect to the serial port using 9600 bits, 8 bits, no
parity, 1 stop bit (9600, 8, N, 1) and flow control
set to Hardware. To physically connect the
terminal, see the
connect to the serial port using 9600 bits, 8 bits, no
parity, 1 stop bit (9600, 8, N, 1) and flow control
set to Hardware. To physically connect the
terminal, see the
•
To access the CLI remotely, initiate an SSH session
to the IP address 192.168.42.42.
to the IP address 192.168.42.42.
Step 2
Log in as admin with the password ironport.
Step 3
At the prompt, run the systemsetup command.
C390_QSG.fm Page 9 Thursday, March 31, 2016 5:57 PM