Cisco Cisco IOS Software Release 12.2(27)SBC
Corporate Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
NSF/SSO—L2VPN Pseudowire Redundancy
First Published: February 28, 2005
Last Updated: February 28, 2006
Last Updated: February 28, 2006
The NSF/SSO—L2VPN Pseudowire Redundancy feature enables you to set up your network to detect a
failure in the network and reroute the L2 service to another endpoint that can continue to provide service.
This feature also functions in an nonstop forwarding (NSF) and stateful switchover (SSO) environment.
The active pseudowire does not change after SSO.
failure in the network and reroute the L2 service to another endpoint that can continue to provide service.
This feature also functions in an nonstop forwarding (NSF) and stateful switchover (SSO) environment.
The active pseudowire does not change after SSO.
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
.
Finding Support Information for Platforms and Cisco IOS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image
support. Access Cisco Feature Navigator at
support. Access Cisco Feature Navigator at
. You must have an account on
Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at
the login dialog box and follow the instructions that appear.
the login dialog box and follow the instructions that appear.