Cisco Cisco IOS Software Release 12.2(10)
5
Release Notes for Cisco IOS Release 12.2(10)DA3 for Cisco DSLAMs with NI-2
OL-2702-01
Installation Notes
Upgrade the Bootflash Image on the NI-2 Card to the 12.1(5)DA2 dboot
Image
Image
When you upgrade from Release 12.1(3)DA or earlier images on the NI-2 card to Release 12.1(5)DA2,
we recommend that you upgrade the bootflash image on the NI-2 card to the 12.1(5)DA1 dboot image.
we recommend that you upgrade the bootflash image on the NI-2 card to the 12.1(5)DA1 dboot image.
To upgrade the dboot image in bootflash, perform the following steps:
Step 10
DSLAM# format bootflash:
Erase all information in bootflash memory. Answer y to all
confirm questions. When the DSLAM returns you to the EXEC
prompt, bootflash memory is successfully formatted and ready
for use.
confirm questions. When the DSLAM returns you to the EXEC
prompt, bootflash memory is successfully formatted and ready
for use.
Ensure that the bootflash is 3.8 MB total. If it is not, go to
.
Step 11
DSLAM# copy
tftp:
//tftpserver:TFTPBOOT/ni2
-dboot-mz.122-10.da3
bootflash:
Copy the boot image from a TFTP server to the bootflash.
Step 12
DSLAM# reload
Reload the system to upgrade the image.
Command
Purpose
Command
Purpose
Step 1
DSLAM> enable
Password: <password>
DSLAM#
Enter enable mode.
Enter the password.
You have entered enable mode when the prompt
changes to DSLAM#.
changes to DSLAM#.
Step 2
DSLAM# delete bootflash:filename
Make room in the bootflash by deleting the name of the
current boot image.
current boot image.
Step 3
DSLAM# squeeze bootflash
Recover available space in bootflash using the squeeze
bootflash command.
bootflash command.
Step 4
DSLAM# copy tftp://[server name]
/[directory]/ni2-dboot-mz.121-5.da2
bootflash:
Copy the boot image to the bootflash.
Step 5
DSLAM# show version
Record the current value of the config-register that
appears on the last line of the show version display.
appears on the last line of the show version display.
Step 6
DSLAM# configure terminal
Enter global configuration mode. You have entered
global configuration mode when the prompt changes to
global configuration mode when the prompt changes to
DSLAM(config)#
.
Step 7
DSLAM(config)# config-register 0
Set the config register to 0x0000 so that the NI-2
reboots in the ROM monitor.
reboots in the ROM monitor.
Step 8
DSLAM(config)# exit
Exit global configuration mode.
Step 9
DSLAM# copy running-config
startup-config
Save the running configuration.
Step 10
DSLAM# reload
Reset the system.