Cisco Cisco Customer Voice Portal 8.0(1)

Note: If the status is Failed you can click the status link and examine the message details. The
configuration line causing the error will be presented in the last line of the status message.

Once the Success status displays, continue to the next step.

From the Operations Console, select Device Management > Gateway and double click the
link for the gateway you added.

Click IOS Commands > Show running-config and verify that the new configuration includes
the commands you just pushed from the Operations Console.

Note: Rollback. If you need to roll the gateway configuration back to its prior configuration
(one level of rollback only is supprted), select: System > IOS Configuration > IOS Template
Deployment > Deployment Status. Select the gateway, then click Rollback.

Save the New Running Configuration to the Startup Configuration File

In this task, save the new, combined running configuration as a new startup configuration.

Note: This procedure assumes that you have already saved your original startup configuration.
If you have not saved the original startup-config file (or saved your original running
configuration), you are urged to do that first. Refer to 

.

Copy the running configuration to the startup configuration file to save in NVRAM in case the
Gateway reboots. At the command prompt:

Type 

and press 

Or type just: 

and press 

Press 

 at the verification prompt.

Load the New Voice Gateway Application Services

Application services were automatically loaded when the gateway started, or when you "reload"
the gateway software. However, when you modified the running configuration, you added
several services which are not yet running. Instead of reloading the gateway, use the following
procedure to start each of the new services.

Note: Even though you have not yet created the customhelloworld application, you have defined
its service in the new gateway configuration and you can load that service on the gateway, along
with the others in the new running configuration. In the customhelloworld exercise, you will
create that application and load it onto the VXML server.

If necessary, Telnet to the gateway and log in.

Getting Started with Cisco Unified Customer Voice Portal Release 8.0(1)