Cisco Cisco DWDM Transceiver Modules Guide D’Information
Product End-of-Life Notice
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 2
End-of-Sale and End-of-Life Announcement for the Cisco 10GBASE-
LW XENPAK Module for Single-Mode Fiber
LW XENPAK Module for Single-Mode Fiber
EOL6862
Cisco announces the end-of-sale and end-of life dates for the Cisco 10GBASE-LW XENPAK Module for
Single-Mode Fiber. The last day to order the affected product(s) is March 25, 2010. Customers with active
service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as
shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates
for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For
customers with active and paid service and support contracts, support will be available until the
termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.
The end-of-sale date for European customers takes effect December 1, 2009. This product will not ship to European
customers after January 1, 2010.
Table 1.
End-of-Life Milestones and Dates for the Cisco 10GBASE-LW XENPAK Module for Single-Mode Fiber
Milestone
Definition
Date
End-of-Life
Announcement Date
Announcement Date
The date the document that announces the end of sale and end of life of a product is
distributed to the general public.
distributed to the general public.
September 24, 2009
End-of-Sale Date
The last date to order the product through Cisco point-of-sale mechanisms. The product is no
longer for sale after this date.
longer for sale after this date.
March 25, 2010(note 1)
Last Ship Date: HW
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers.
Actual ship date is dependent on lead time.
Actual ship date is dependent on lead time.
June 23, 2010
End of SW Maintenance
Releases Date: HW
Releases Date: HW
The last date that Cisco Engineering may release any final software maintenance releases or
bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the
product software.
bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the
product software.
March 25, 2011
End of Routine Failure
Analysis Date: HW
Analysis Date: HW
The last-possible date a routine failure analysis may be performed to determine the cause of
product failure or defect.
product failure or defect.
March 25, 2011
End of New Service
Attachment Date: HW
Attachment Date: HW
For equipment and software that is not covered by a service-and-support contract, this is the
last date to order a new service-and-support contract or add the equipment and/or software to
an existing service-and-support contract.
last date to order a new service-and-support contract or add the equipment and/or software to
an existing service-and-support contract.
March 25, 2011
End of Service Contract
Renewal Date: HW
Renewal Date: HW
The last date to extend or renew a service contract for the product.
June 20, 2014
Last Date of Support:
HW
HW
The last date to receive service and support for the product. After this date, all support services
for the product are unavailable, and the product becomes obsolete.
for the product are unavailable, and the product becomes obsolete.
March 24, 2015
HW = Hardware
OS SW = Operating System Software App. SW = Application Software
(note 1)End of Sale for European customers takes effect December 1, 2009. This product will not ship to European
customers after January 1, 2010 due to environmental regulations.
Table 2.
Product Part Numbers Affected by This Announcement
End-of-Sale Product
Part Number
Part Number
Product Description
Replacement Product Part Number
XENPAK-10GB-LW
10GBASE-LW
XENPAK Module
XENPAK Module
See the Product Migration Options section below
for detailed information on replacing this product.
for detailed information on replacing this product.
XENPAK-10GB-LW=
10GBASE-LW
XENPAK Module
XENPAK Module
See the Product Migration Options section below
for detailed information on replacing this product.
for detailed information on replacing this product.