Cisco EFG120 EtherFast Network Attached Storage V 1.0 Manuel De L’Administrateur
Adding the NSS to your Network
Allowing a VLAN Access to the NSS
Linksys Small Business NSS4000 and NSS6000 Series Network Storage System Administration Guide
21
3
•
Label: A text description for the VLAN (for example, “Data,” “Voice,” “Video,”
and so on). This description is used solely as a reference within the NSS
interface and does not affect
its operation.
and so on). This description is used solely as a reference within the NSS
interface and does not affect
its operation.
Allowing a VLAN Access to the NSS
To set up a network VLAN to access the NSS:
STEP 1
From the Manager Menu, click Network
VLAN.
The VLAN Configuration page appears.
STEP 2
In the New VLAN area of the page, set up the following fields:
•
Link: Select the Ethernet link on which you want the VLAN to connect to the
NSS. Available options depend on the configuration of your Ethernet link(s).
NSS. Available options depend on the configuration of your Ethernet link(s).
•
VLAN: Enter the ID of the VLAN as it is defined within your network. The
range of valid VLAN IDs is from 0 to 4095.
range of valid VLAN IDs is from 0 to 4095.
•
Priority: Select the QoS priority for the VLAN traffic as it is defined for your
network. Valid options range from 0 to 7 (as defined by the IEEE 802.1p
standard). VLAN Ethernet frames contain a three-bit priority tag ranging
from 0 to 7 (where 0 is best effort and 7 is network-critical traffic).
network. Valid options range from 0 to 7 (as defined by the IEEE 802.1p
standard). VLAN Ethernet frames contain a three-bit priority tag ranging
from 0 to 7 (where 0 is best effort and 7 is network-critical traffic).