SINGER PERFECT FINISH Manuel D'Instructions

Page de 17
4
5
OPERATING INSTRucTIONS
Before First Use
remove any protective films or stickers from the soleplate and the iron.
read all safety and operating instructions.
Fill the water tank as described in “how to Fill Water”.
Plug the iron into a grounded electrical outlet. 
Consult the garment’s label for temperature instructions or use the chart on 
page 6 of this manual for recommendations. 
Turn the iron on by pressing the Temperature Control Button. The     
Temperature Display Light will flash with an audible beep sound.
Select the maximum temperature by pressing the Temperature Control Button 
repeatedly until the 
MAX light is lit. 
When the selected temperature is reached, the Temperature Display Light will 
stop flashing and an audible beep will sound. The iron is ready to use.
move the variable Steam Control Dial to the maximum position    .
On an ironing board or protected surface, iron an old towel or other heavy 
material until the water tank is empty and no more steam is produced.
It is normal for a small amount of smoke and a light odor to be produced the 
first time the iron is used. This will disappear quickly.
Particles may emit from the iron the first time it is used. They are not harmful 
and should disappear after the iron has been used as described above.
Filling the Water Tank
ensure iron is unplugged.
move the variable Steam Control Dial to      position.
Open the Water Inlet Cover and tilt the iron slightly forward, resting on its 
heel.
Using the filling cup provided, fill the water chamber to the mAX mark.
Close the Water Inlet Cover.
To refill the water tank during ironing, always unplug the iron. When you 
return to ironing, make sure the iron reheats to the desired level and the 
Temperature Display Light stops flashing before continuing.
Water Recommendations
Singer home essentials irons are designed to be used with regular tap water.
If your water is especially hard or if you use a water softener, try using 
inexpensive bottled spring water.
Never use water with additives, including scents, starches, or fabric 
conditioners, as they can cause deposits to form in the iron that can stain 
clothing.
WARNING: ALWAYS mAke SUre The IrON IS UNPLUggeD BeFOre FILLINg 
WITh WATer Or COmINg INTO CONTACT WITh LIQUID OF ANY kIND.