Cisco Cisco Edge 340 Digital Media Player Guide De Montage
6
Mounting the Kit Assembly (Display Mount) for Cisco Edge 340 Series
78-21288-01
Securing the Assembled Mounting Kit and the Cisco Edge 340
Step 6
Flip your Cisco Edge 340 upside-down and place it inside the front cover. The Cisco logo on the Cisco
Edge 340 chassis should touch the center cross on the front cover, and should be aligned with the Cisco
logo on the front cover.
Edge 340 chassis should touch the center cross on the front cover, and should be aligned with the Cisco
logo on the front cover.
Step 7
Place the front cover onto the back plate so that the Cisco Edge 340 is between them. The bearing slot
of the front cover should be aligned with the same one of the back plate.
of the front cover should be aligned with the same one of the back plate.
Step 8
Thread a No. 1 screw through each side support bore in the front cover, until the screw head forms a level
plane with the side support. For information about this screw, see
plane with the side support. For information about this screw, see
Step 9
Perform the following tasks, first on one side of the LCD-mount support bracket and then on the other
side:
side:
a.
Carefully position a flat washer (No. 3) over the innermost slot that extends vertically down the
LCD-mount support bracket.
LCD-mount support bracket.
b.
Insert the lip of the threaded insert from one LCD-mount plate through the flat washer and into the
bracket slot.
bracket slot.
c.
Thread a No. 2 screw through the back of the bracket slot into the flat washer, and then into the
threaded insert on the LCD-mount Plate.
threaded insert on the LCD-mount Plate.
d.
Manipulate the LCD-mount plate such that its angle of rotation extends correctly outward
(perpendicular) from the bracket.
(perpendicular) from the bracket.
e.
Whether you mount the Cisco Edge 340 above or below the flat-panel display, the free end of the
LCD-mount plate should be aligned correctly with a threaded VESA bore on the back of your
flat-panel display.
LCD-mount plate should be aligned correctly with a threaded VESA bore on the back of your
flat-panel display.
f.
Thread a screw (provided with your third-party VESA bracket kit) through the long slot in the
LCD-mount plate and into the highest-threaded VESA bore on the corresponding side of your
flat-panel display.
LCD-mount plate and into the highest-threaded VESA bore on the corresponding side of your
flat-panel display.
Step 10
Insert the locking plate through the bearing slot on either side of the front cover, and then push it through
the bearing slot in the opposite side.
the bearing slot in the opposite side.
Securing the Assembled Mounting Kit and the Cisco Edge 340
You can secure your assembled mounting kit and the Cisco Edge 340 that it contains, to discourage
tampering and prevent theft. The method that you use is left to your discretion as a professional. The
procedure described here is only one possible method.
tampering and prevent theft. The method that you use is left to your discretion as a professional. The
procedure described here is only one possible method.
Step 1
Feed one end of a security cable through the mouth of the locking plate.
Step 2
Feed the other end of the security cable through or around a heavy, stationary object.
Step 3
Use a padlock to join both the ends of the security cable together.