Cisco Headend System Release 2.7 Guide De Montage
Restart the System Components
4023737 Rev C
71
Restarting the DNCS
1 From an xterm window on the DNCS, type dncsStart and press Enter. The
Informix database, the SOAPServers, and DNCS processes start.
2 Click the middle mouse button on the DNCS and select Administrative Console.
The DNCS Administrative Console opens.
3 From the DNCS Administrative Console Status window, click DNCS Control.
Results:
The DNCS Control window opens.
Green indicators begin to replace red indicators on the DNCS Control
window.
window.
4 From an xterm window on the DNCS, type dncsControl and then press Enter.
The Dncs Control utility window opens.
5 Type 2 (for Startup / Shutdown Single Element Group) and then press Enter.
The Dncs Control window updates to list the status of all of the processes and
servers running on the DNCS.
servers running on the DNCS.
6 Wait for the Dncs Control window to list the current status (Curr Stt) of all the
processes and servers as running.
Notes:
Notes:
The Dncs Control window updates automatically every few seconds or you
can press Enter to force an update.
can press Enter to force an update.
The indicators on the Dncs Control window all become green when the
processes and servers have restarted.
processes and servers have restarted.
Restarting the RNCS Processes
If the Distributed DNCS licensed feature is enabled on your system, complete the
following steps to restart the RNCS processes.
1 From a dncs xterm window on the DNCS, type the following command and
following steps to restart the RNCS processes.
1 From a dncs xterm window on the DNCS, type the following command and
press Enter.
siteCmd <RNCS hostname> lionnStart
Note: Replace <RNCS hostname> with the hostname of the RNCS.
2 Wait a few moments and then type the following command and press Enter to
verify that all of the RNCS processes have started.
siteCmd <RNCS hostname> pgrep –fl dvs