Cisco Headend System Release 2.7 Guide De Montage
Chapter 4 Post-Upgrade Procedures
82
4023737 Rev C
Remove Object Carousel EAS Playout
This procedure removes incompatible playouts on the TS Broadcaster and is
required for both TS Broadcaster version 1.x and 2.x. software. You must perform
this procedure because the original OCEAS application and playout create a conflict
with 2.7/3.7/4.2 SP3—the mechanism that constructs the OCEAS playout and
application was changed in this release.
required for both TS Broadcaster version 1.x and 2.x. software. You must perform
this procedure because the original OCEAS application and playout create a conflict
with 2.7/3.7/4.2 SP3—the mechanism that constructs the OCEAS playout and
application was changed in this release.
Note: This procedure should be performed now and immediately followed by an
EAS system test. For instructions, see Check the EAS Configuration—Post Upgrade
(on page 83).
1 Open a browser and log into your TS Broadcaster.
2 Delete the OCEAS playout.
EAS system test. For instructions, see Check the EAS Configuration—Post Upgrade
(on page 83).
1 Open a browser and log into your TS Broadcaster.
2 Delete the OCEAS playout.
TSB 1.x Systems:
a Click Playouts, select the stream name from the pull-down menu and click
a Click Playouts, select the stream name from the pull-down menu and click
Select.
b Click Delete Playout and select the OCEAS playout (if present) from the
pull-down menu.
c Click Delete.
TSB 2.x Systems:
d Click Live Applications and change Playout Type: to OOB OC Playouts.
e Delete the OCEAS playout, if present.
TSB 2.x Systems:
d Click Live Applications and change Playout Type: to OOB OC Playouts.
e Delete the OCEAS playout, if present.
3 Delete the OCEAS application.
TSB 1.x Systems:
a Click Application Sets and click Delete Application Set.
b Select the OCEAS application set name (if present) from the pull-down menu.
c Click Delete.
TSB 2.x Systems:
d Click OCAP Applications and change View to Unscheduled.
e Delete the OCEAS application, if present.
a Click Application Sets and click Delete Application Set.
b Select the OCEAS application set name (if present) from the pull-down menu.
c Click Delete.
TSB 2.x Systems:
d Click OCAP Applications and change View to Unscheduled.
e Delete the OCEAS application, if present.
The next time EAS occurs, the OCEAS playout and application will be automatically
created by the DNCS. The OCEAS playout and application will also be removed at
the successful completion of each EAS test.
created by the DNCS. The OCEAS playout and application will also be removed at
the successful completion of each EAS test.