Cisco Cisco Aironet 1200 Access Point Guide De Montage
17
Quick Start Guide Cisco Aironet 1200 Series Access Points
Note
Plan to configure the access point before mounting it in a relatively
inaccessible location. Some steps, such as those requiring a serial
cable, are easier to perform if the access point is accessible.
inaccessible location. Some steps, such as those requiring a serial
cable, are easier to perform if the access point is accessible.
Attaching and Adjusting the Antennas
2.4-GHz Antennas
The access point supports single antenna or dual diversity antennas. Two
RP-TNC connectors are provided on the back of the unit for the 2.4-GHz
radio.
RP-TNC connectors are provided on the back of the unit for the 2.4-GHz
radio.
Attach the antennas to the RP-TNC connectors on the back of the access point
and hand tighten.
and hand tighten.
If you are using one antenna, attach the antenna or antenna cable to the
2.4-GHz Right/Primary RP-TNC connector.
2.4-GHz Right/Primary RP-TNC connector.
If you are using two antennas for diversity coverage, attach the second
antenna or antenna cable to the 2.4-GHz Left RP-TNC antenna connector.
antenna or antenna cable to the 2.4-GHz Left RP-TNC antenna connector.