Cisco Cisco Tunnel Terminating Gateway (TTG)
EDR Format Configuration Mode Commands
attribute ▀
Command Line Interface Reference, StarOS Release 18 ▄
3643
Attributes
Description
sn-start-time [
format
format
format
]
localtime
This attribute reports the timestamp for last packet of flow in UTC.
sn-subscriber-imsi
This attribute reports the IMSI number of the subscriber.
sn-subscriber-nat-
flow-ip
flow-ip
For NAT in-line service, this attribute reports the NAT IP address of NAT-enabled subscriber.
sn-subscriber-nat-
flow-port
flow-port
For NAT in-line service, this attribute reports the NAT port number of NAT-enabled subscriber.
sn-subscriber-port
This attribute reports the TCP/UDP port number of the Mobile handling subscriber data flow.
sn-volume-amt { ip |
tcp } { bytes | pkts
} { uplink |
downlink }
tcp } { bytes | pkts
} { uplink |
downlink }
This attribute reports IP/TCP protocol-specific volume amount of downlink/uplink bytes/packets
during a flow. This includes all the bytes/packets received by ECS, including the bytes/packets
dropped and retransmitted by ECS.
during a flow. This includes all the bytes/packets received by ECS, including the bytes/packets
dropped and retransmitted by ECS.
sn-volume-dropped-
amt { ip | tcp } {
bytes | packets } {
downlink | uplink }
amt { ip | tcp } {
bytes | packets } {
downlink | uplink }
For Stateful Firewall in-line service, this attribute reports IP/TCP protocol-specific volume amount
of downlink/uplink bytes/packets dropped by Stateful Firewall during a flow.
of downlink/uplink bytes/packets dropped by Stateful Firewall during a flow.
sn-volume-ip-with-
rtsp-or-rtp bytes {
downlink | priority
| uplink }
rtsp-or-rtp bytes {
downlink | priority
| uplink }
This attribute reports the IP volume amount of downlink/uplink bytes of an RTSP flow and the RTP
flows controlled by it, or Comma Separated Value (CSV) position priority of this field. If
flows controlled by it, or Comma Separated Value (CSV) position priority of this field. If
uplink
or
downlink
is not specified it shows the total of both.
sn-vrf-name
This attribute indicates the VRF name associated with the base session of NEMO.
Important:
This is a customer-specific attribute.
subscriber-ipv4-
address
address
For NAT in-line service, this attribute generates the subscriber IPv4 address in the NBR.
subscriber-ipv6-
address
address
For NAT in-line service, this attribute generates the subscriber IPv6 prefix in the NBR.
transaction-
downlink-bytes
downlink-bytes
This attribute reports the total downlink bytes for the transaction.
transaction-
downlink-packets
downlink-packets
This attribute reports the total downlink packets for the transaction.
transaction-uplink-
bytes
bytes
This attribute reports the total uplink bytes for the transaction.
transaction-uplink-
packets
packets
This attribute reports the total uplink packets for the transaction.
format { MM/DD/YY-HH:MM:SS | MM/DD/YY-HH:MM:SS:sss | MM/DD/YYYY-HH:MM:SS |
MM/DD/YYYY-HH:MM:SS:sss | YYYY/MM/DD-HH:MM:SS | MM/DD/YYYY-HH:MM:SS:sss |
YYYYMMDDHHMMSS | YYYYMMDDHHMMSSsss | seconds
MM/DD/YYYY-HH:MM:SS:sss | YYYY/MM/DD-HH:MM:SS | MM/DD/YYYY-HH:MM:SS:sss |
YYYYMMDDHHMMSS | YYYYMMDDHHMMSSsss | seconds
Specifies the timestamp format.